keronlounge.blogg.se - Tutorial mikrotik lengkap dengan winbox

Tutorial mikrotik lengkap dengan winbox how to#
Tutorial mikrotik lengkap dengan winbox Pc#
Tutorial mikrotik lengkap dengan winbox mac#

This is not the most efficient method of using the available bandwidth on a network, but is perhaps easier than having a PPPoE A/C on every Mikrotik router and using RADIUS as you can just have PPP secrets setup on one router.

Tutorial mikrotik lengkap dengan winbox Pc#

Now you should be able to establish a PPPoE connection from a PC plugged into the eth2 port on router R2, this PPPoE connection will terminate on router R1. put an IP address onto eth2 (any address seems to work, but it maybe better to use a different subnet for routing purposes).

on R2 and add eth2 and the EoIP tunnel to the bridge.ĥ. add a PPPoE server to the Bridge on R1.Ĥ.

Tutorial mikrotik lengkap dengan winbox mac#

create a new EoIP tunnel on R2, where the tunnel ID is the same as the one on R1 but the MAC addreses are different.ģ. you can ping rB from R1 and R1 from R2 where the R1 facing eth port is called eth1 and its other port is called eth2.Ģ. Using 2 routers called R1 and R2 that have an IP connection between them and R2 has 2 ethernet ports, i.e.

Tutorial mikrotik lengkap dengan winbox how to#

This is how to set up EoIP to bridge two (or more) Mikrotik routers for central PPPoE authentication

Maximal count of EoIP tunnels is 65536.

The EoIP protocol encapsulates Ethernet frames in GRE (IP protocol number 47) packets (just like PPTP) and sends them to the remote side of the EoIP tunnel.

IP addresses and other tunnels may be run over the interface.

This interface supports all features of and Ethernet interface.

The EoIP interface appears as an Ethernet interface under the interface list.

Each EoIP tunnel interface can connect with one remote router which has a corresponding interface configured with the same ‘Tunnel ID’.

The EoIP tunnel may run over an IPIP tunnel, a PPTP 128bit encrypted tunnel, a PPPoE connection, or any connection that transports IP.

Possibility to bridge LANs over 802.11b ‘ ad-hoc‘ wireless networksĪn EoIP interface should be configured on two routers that have the possibility for an IP level connection.

Possibility to bridge LANs over encrypted tunnels tutorial setting mikrotik router dengan winbox lengkap-mikrotik adalah sebuah sistem operasi termasuk didalam nya perangkat lunak yang dipasang pada suatu komputer sehingga komputer tersebut dapat berperan sebagai jantung network ,pengendali atau pengatur lalu lintas data antar jaringan ,komputer jenis ini dikenal dengan nama router.

Possibility to bridge LANs over the Internet.

This protocol makes multiple network schemes possible. When the bridging function of the router is enabled, all Ethernet level traffic (all Ethernet protocols) will be bridged just as if there where a physical Ethernet interface and cable between the two routers (with bridging enabled). The EoIP interface appears as an Ethernet interface. We can also configure it by accessing it via the browser to IP 192.168.88.1 so that we can implement it on any network, even if you need DHCP Server or VLAN tagging.Ethernet over IP (EoIP) Tunneling is a MikroTik RouterOS protocol that creates an Ethernet tunnel between two routers on top of an IP connection. With small dimensions, MQS can be easily carried anywhere. We simply bring MQS + PowerBank and smartphone to the tower can directly do pointing + monitoring the quality of the wireless link so that we don't need to go up and down the tower to do the config and pointing, No more climbing and balancing towers with unwieldy laptops ? When the RBMQS device gets power supply using a powerbank, the PoE-Out on the ethernet will be active and can output a maximum of 7W so that it will be very helpful for us when installing a wireless device alone on top of the tower. MQS is a tool for network administrators that allows you to manage MikroTik devices (it work also for other devices) from your smartphone via a Wi-Fi connection.īy default MQS will function as an AP and transmitting RBMQS_AP1 SSID and automatically bridge between ether & wlan so your smartphone can connected to the SSID and without an ethernet port on the Laptop, we can still do remote config to the Router / Server ethernet on the network. Review dan Setup RBMQS (Mobile Quick Setup) - System Administrator’s Best Friend